Fabrication capabilities
Made-to-order components for roofing, cladding and construction.
From routine finishing details to project-specific folded sections, Color-Clad manufactures components to the required profile, material, finish and quantity.
Based in Abertillery, South Wales · Supply only · Nationwide UK delivery
- 3m
- Maximum length across key flashing, panel and formed-section ranges
- 2.65m
- Maximum pressed roof-profile length
- 0.7–2.0mm
- Advertised material thickness range
- UK-wide
- Nationwide supply from South Wales
Industrial cutting and CNC folding
Prepared accurately. Folded to the project requirement.
Color-Clad’s AMADA GS II-630 guillotine and AMADA HRB-1003 CNC press brake support accurate blank preparation and long, repeatable folds across the company’s roofing, cladding and formed-section range.
AMADA GS II-630
3,050mm hydraulic guillotine cutting length
Programmable backgauge control supports repeatable blank widths for one-off and batch work.
AMADA HRB-1003
100-tonne, 3-metre-class CNC press brake
Used for long flashings, trims, gutters and multi-bend formed sections.
Final component feasibility depends on material, gauge, tooling, bend geometry and required length.
Explore the fabrication range
Find the component or profile you need.
Browse by category, or start with a sketch if the formal product name is not known.
Colour-coated steel
Coordinated roofing and cladding details up to 3 metres.
Color-Clad fabricates 0.7mm colour-coated steel into made-to-measure finishing and rainwater components for commercial roofing and cladding projects.
Products: Bespoke flashings, Verge flashings, Drip flashings, Internal corners, External corners, Barge boards, Trimline gutters, Downpipes.
- Thickness
- 0.7mm
- Maximum length
- 3m
- Finish options
- Tata Steel Colorcoat® range
- Selected finishes
- Colorcoat® LG leathergrain and Colorcoat Prisma®
Final colour, finish and material availability is confirmed at quotation stage.
Browse flashings & trims
Pre-coated aluminium
Lightweight folded components and clean architectural panels.
Pre-coated aluminium is fabricated across multiple gauges for flashings, detailed folds and panel-based applications.
Products: Flashings, Verge and drip details, Corners, Barge-board details, Associated folded trims, Secret-fix panels, Vieo panels and related folded details, subject to specification.
- Thicknesses
- 0.9mm, 1.6mm and 2.0mm
- Maximum length
- 3m
Product suitability is confirmed against the required profile, material and gauge.
Browse panels
Galvanised steel
Formed sections for support, restraint and project-specific detailing.
Galvanised sheet is cut and folded into secondary support and formed sections across a practical range of gauges.
Products: Zed sections, Angles, Purlins, Top-hat sections, Bespoke folded channels where technically feasible.
- Thicknesses
- 0.7mm, 0.9mm, 1.2mm, 1.6mm and 2.0mm
- Maximum length
- 3m
Section geometry, flange dimensions and bend feasibility are reviewed at quotation stage.
Browse galvanised sections
Pressed roof profiles
When the original profile is no longer available.
Existing and discontinued roof profiles can be assessed from a sample, drawing, tracing or photograph and reproduced where technically feasible.
2.65m maximum pressed profile length
Accepted information
- Physical sample
- Dimensioned sketch
- Technical drawing
- Tracing
- Marked-up photograph
- Existing product reference
Applications
- Commercial roof repairs
- Refurbishment
- Building extensions
- Facilities maintenance
- Matching older roof areas
Not every proprietary, curved, corrugated or complex profile can be reproduced using standard press-brake tooling. Feasibility is confirmed following technical assessment.
Profile and product matrix
The full capability range at a glance.
| Capability | Material | Thickness | Max length | Typical products |
|---|---|---|---|---|
| Colour-coated steel | Tata Steel Colorcoat® / pre-finished steel | 0.7mm | 3m | Flashings, verges, drips, corners, barge boards, gutters, downpipes |
| Pre-coated aluminium | Pre-coated aluminium | 0.9 / 1.6 / 2.0mm | 3m | Flashings, folded details, secret-fix panels |
| Galvanised steel | Galvanised sheet | 0.7 / 0.9 / 1.2 / 1.6 / 2.0mm | 3m | Zeds, angles, purlins, top hats |
| Pressed roof profiles | Confirmed per assessment | Confirmed per assessment | 2.65m | Replacement and discontinued profiles |
| Vieo panels | Confirmed per project specification | Confirmed per project specification | 3m | Panel and associated folded details |
Colour-coated steel
- Material
- Tata Steel Colorcoat® / pre-finished steel
- Thickness
- 0.7mm
- Max length
- 3m
- Typical products
- Flashings, verges, drips, corners, barge boards, gutters, downpipes
Pre-coated aluminium
- Material
- Pre-coated aluminium
- Thickness
- 0.9 / 1.6 / 2.0mm
- Max length
- 3m
- Typical products
- Flashings, folded details, secret-fix panels
Galvanised steel
- Material
- Galvanised sheet
- Thickness
- 0.7 / 0.9 / 1.2 / 1.6 / 2.0mm
- Max length
- 3m
- Typical products
- Zeds, angles, purlins, top hats
Pressed roof profiles
- Material
- Confirmed per assessment
- Thickness
- Confirmed per assessment
- Max length
- 2.65m
- Typical products
- Replacement and discontinued profiles
Vieo panels
- Material
- Confirmed per project specification
- Thickness
- Confirmed per project specification
- Max length
- 3m
- Typical products
- Panel and associated folded details
Maximum lengths, material availability and product suitability are confirmed at quotation stage against the project requirement.
Start with what you have
A drawing is useful. A technical product name is not essential.
Color-Clad can begin an assessment from the information available and confirm what else is needed before manufacture.
Technical drawing
Formal CAD or hand-drawn dimensioned sheet
Dimensioned sketch
Rough sketch with key measurements noted
Existing component
A physical part to match or replicate
Physical sample
Sample section for profile assessment
Site photograph
Photo showing the required detail in context
Marked-up PDF
Annotated drawing or specification document
A faster route to the right profile
Can’t name it? Sketch it.
Upload a rough drawing, photograph or existing profile and include the dimensions, length and quantity you know. The fabrication team can review the requirement and confirm the next step.
Upload a sketch, drawing or photograph
Add dimensions, quantity and finish where known.
- No technical name required
- JPG, PNG and PDF accepted
- Multiple reference files can be submitted
- Material and finish can be left as "Not sure"
Next steps
Discuss a fabrication requirement.
Send the dimensions, drawing, sample or sketch and begin the quotation process.